deoxidizing
英
美
网络 脱氧; 去氧
双语例句
- Therefore, it is one of the key problems of producing the clean steel to control the deoxidization and deoxidizing products of the liquid steel.
因而，钢水的脱氧和脱氧产物的控制成为生产纯净钢的关键问题之一。 - The technology of aluminium deoxidizing and alloying has been studied. That is, after preliminary argon blowing and oxygen detecting for the aluminum containing steel, determine the feeding amount of aluminium according to the oxygen content in steel and then reblow argon.
对含铝钢经预吹氩定氧后，根据钢中氧含量确定加铝量，再补吹氩的铝脱氧合金化工艺进行研究和探索。 - The composition of the secondly and thirdly deoxidizing products can be controlled through controlling the content of aluminum and calcium of the strong deoxidizing elements, making them have good distortion ability in hot work.
二次和三次脱氧产物的成分可以通过控制钢液中强脱氧元素铝和钙的含量来控制，使它们具有良好的热加工变形能力。 - Titanium powders produced by deoxidizing TiO2 directly is the mainstream, if we can empolder a kind of more simple and lower cost method to produce Titanium powders, it will certainly stimulate the development of Titanium production industry.
采用TiO2直接还原法生产钛粉已经成为生产钛粉的主要研究方法，如果能开发出更简单、成本更低的方法必将极大地促进钛粉生产行业的发展。 - The size of deoxidizing products increases with the increased degree of supersaturation of deoxidizing elements;
脱氧产物尺寸随脱氧元素过饱和度增加而增加； - The separation process about deoxidizing stove tail gas in the modified siemens arts and crafts in polycrystalline silicon production was improved.
对改良西门子法多晶硅生产中尾气分离工艺进行了改进。 - The feasibility of producing quality cold rolled sheets through deoxidizing and alloying with Fe-Al-Mn alloy and a process of producing low-carbon aluminium killed steel through deoxidizing and alloying are introduced.
介绍了攀钢用铝锰铁脱氧合金化生产高级别冷轧薄板用钢的可行性和脱氧合金化生产低碳铝镇静钢的工艺路线。 - Discussion and application of high temperature combustion technology in magnesium deoxidizing furnace
高温空气燃烧技术在金属镁还原炉上的应用探讨 - The results are concluded as follows: All of the samples have different levels of deoxidizing ability.
结果如下：总还原力测定结果：所有样品都表现出了不同程度的还原能力。 - On this basis, the effect of the supersaturation degree of deoxidizing elements on the size distribution of deoxidizing products and the relationship between the total oxygen content of extra-low steel and the amount and size of oxide inclusions are discussed.
在此基础上，探讨脱氧元素过饱和度对脱氧产物尺寸分布规律的影响，以及超低氧钢全氧含量与氧化物夹杂数量和尺寸的关系。